Manufacturers of metal 3D printing equipment introduce that there are many printing methods used in the metal 3D printing industry. Among many technologies, selective laser sintering technology and electron beam selective melting technology are the two technologies most used by experimenters. This article will explain in detail the advantages of electron beam selective melting technology in Metal 3D printing for metal 3D printing equipment manufacturers?

1. Vacuum environment can avoid oxidation

The intimate manufacturers of metal 3D printing equipment claim that the electron beam selective melting technology uses high-energy electron beam as the main processing heat source, and can be operated by manipulating the magnetic deflection coil after scanning and forming. The manufacturers of metal 3D printing equipment claim that there is no mechanical inertia in the whole process. At the same time, because the electron beam has the advantage of vacuum environment, the manufacturer of metal 3D printing equipment explained that using this technology to print materials can avoid oxidation of metal powder in the process of liquid-phase sintering or melting.

2. High utilization and low maintenance cost

Practical Metal 3D printing equipment manufacturers can use this technology to achieve greater energy utilization, and have the characteristics of large depth, high material absorption rate, stable operation and low maintenance cost. These features mean that the metal 3D printing equipment manufacturer Lai not only saves costs, but also greatly improves product quality.

3. High forming efficiency without support

Trusted Metal 3D printing equipment manufacturers say that most metals use metal as a support to avoid collapse during printing. However, metal 3D printing equipment manufacturers explain that if the electron beam selective melting technology is used, it not only does not need a support, but also can achieve a better forming rate of the product.

Metal 3D printing equipment manufacturers’ introduction as a technology with high utilization rate in the industry, the popularity of electron beam selective melting is mainly due to the above three advantages. These three advantages not only bring metal 3D printing equipment manufacturers a faster production experience, but also greatly save production costs, and improve the production quality of metal 3D printing equipment manufacturers, but also reduce production processes.